- ページ 17
コントロールユニット akrometrix DICのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。akrometrix DIC 19 ページ。
ページを印刷するDIC User Manual
Figure 3.6 Don't Reset to Defaults
g. Display the camera output: CameraShow Camera (Figure 3.7).
h. A live view of the camera will be shown in the camera output window. Adjust
the light source intensity and/or lens iris as necessary.
i. If the camera is found and a live view can be seen in the utility program,
repeat Step 2 for the second camera. If both camera images can be seen,
close the utility program and reopen the DIC program. Otherwise, go to step
3.
4. Disconnect the non-functioning camera's cable and reconnect it. In the device
wizard that appears:
a. Do NOT connect to Windows Update to search for software (Figure 3.8).
Figure 3.8
b. Install from a specific location (Figure 3.9).
c. Don't search; choose the driver to install (Figure 3.10).
Figure 3.7 Show Camera
40-5000-01500 Rev. A
Figure 3.9
Page 17 of 19