akrometrix DIC Посібник користувача - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління akrometrix DIC. akrometrix DIC 19 сторінок.
Друкувати сторінкуDIC User Manual
Figure 3.6 Don't Reset to Defaults
g. Display the camera output: CameraShow Camera (Figure 3.7).
h. A live view of the camera will be shown in the camera output window. Adjust
the light source intensity and/or lens iris as necessary.
i. If the camera is found and a live view can be seen in the utility program,
repeat Step 2 for the second camera. If both camera images can be seen,
close the utility program and reopen the DIC program. Otherwise, go to step
3.
4. Disconnect the non-functioning camera's cable and reconnect it. In the device
wizard that appears:
a. Do NOT connect to Windows Update to search for software (Figure 3.8).
Figure 3.8
b. Install from a specific location (Figure 3.9).
c. Don't search; choose the driver to install (Figure 3.10).
Figure 3.7 Show Camera
40-5000-01500 Rev. A
Figure 3.9
Page 17 of 19