顕微鏡 Ash INSPEX 3のPDF クイック・スタート・ユーザー・マニュアルをオンラインで閲覧またはダウンロードできます。Ash INSPEX 3 6 ページ。
ページを印刷するQuick Start User Guide Rev 2.1
INSPEX
3
*You will find your full
Please remove standard +5 lens before installation of +10 plan1x, +25 or +50 lens.
Also ensure the newly installed lens is selected in System settings and save to Startup
STEP 1: ESD Grounding Cable Assembly (Optional)
Remove the INSPEX
Screw the cable as indicated with the M4 screw provided. Ensure that the
1.
cable is pulled upward during assembly.
When screwed in place, bend the cable so that it feeds outward.
2.
3.
Ensure that the bottom ridge
could stop the INSPEX
1
STEP 2: Mouse & Keyboard Set-Up
Remove USB dongle from the underside of the mouse.
1.
Ensure mouse is switched to on. Ensure keyboard is switched to on.
2.
3.
Remove USB dongle from the underside of the keyboard located in the
batteries compartment.
Remove yellow "arrow" tab in the keyboard.
4.
2
1
Quick Start User Guide
INSPEX
3 User Manual on the supplied USB.
INSPEX 3 Hardware Setup
3
Camera Head and all cables from packaging.
3
Arm bracket from attaching correctly.
2
1
3
Settings.
*
under the screw has not been covered as it
4
3
ASH
*
2