Ash INSPEX 3 빠른 시작 사용 설명서
{카테고리_이름} Ash INSPEX 3에 대한 빠른 시작 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ash INSPEX 3 6 페이지.
페이지 인쇄Quick Start User Guide Rev 2.1
INSPEX
3
*You will find your full
Please remove standard +5 lens before installation of +10 plan1x, +25 or +50 lens.
Also ensure the newly installed lens is selected in System settings and save to Startup
STEP 1: ESD Grounding Cable Assembly (Optional)
Remove the INSPEX
Screw the cable as indicated with the M4 screw provided. Ensure that the
1.
cable is pulled upward during assembly.
When screwed in place, bend the cable so that it feeds outward.
2.
3.
Ensure that the bottom ridge
could stop the INSPEX
1
STEP 2: Mouse & Keyboard Set-Up
Remove USB dongle from the underside of the mouse.
1.
Ensure mouse is switched to on. Ensure keyboard is switched to on.
2.
3.
Remove USB dongle from the underside of the keyboard located in the
batteries compartment.
Remove yellow "arrow" tab in the keyboard.
4.
2
1
Quick Start User Guide
INSPEX
3 User Manual on the supplied USB.
INSPEX 3 Hardware Setup
3
Camera Head and all cables from packaging.
3
Arm bracket from attaching correctly.
2
1
3
Settings.
*
under the screw has not been covered as it
4
3
ASH
*
2