Ash INSPEX 3 빠른 시작 사용 설명서 - 페이지 3
{카테고리_이름} Ash INSPEX 3에 대한 빠른 시작 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ash INSPEX 3 6 페이지.
페이지 인쇄Quick Start User Guide Rev 2.1
STEP 5: Setting the Correct Height for Measurement
Press and hold the power button on the INSPEX
1.
2.
Click on the Settings icon on the main toolbar on the right-hand side of your
screen.
3.
In System Settings, ensure the correct screen size and Lens Dioptre that you are
currently using are selected.
The user must set the Focal Plane of the lens first to suit the height of the
4.
object.
To set the Focal Plane:
Place the unit in Overview Mode by clicking the overview icon.
a)
b)
Move the object with the area of interest under the crosshair on screen.
Exit Overview Mode by clicking the Overview icon again.
c)
Click the Zoom In
d)
Magnification.
Manually adjust the height of the INSPEX
e)
down on the stand until the object is in focus.
f)
Now you are ready to measure at your desired focal plane!
Note: Once you have achieved your Focal Plane DO NOT adjust the height of the object or the
height of the INSPEX
3
INSPEX 3 Software Setup
button or use the dial on the KPIII to zoom to Full
3
if you wish to continue measuring at this focal distance.
3
3
to switch on.
3
by moving the focus block up and
Refer to user manual for full details
1
ASH