- ページ 15

マトリックススイッチャー CYP CMPRO-U4H4CVPLのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP CMPRO-U4H4CVPL 20 ページ。 4k2k 4×4 hdmi matrix over cat5e/6/7

Once in the command line interface (CLI) type "telnet", then the IP

address of the unit and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP configurations. To reset the IP,

type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of

commands, see Section 6.7).

Note: Any commands will not be executed unless followed by a

carriage return. Commands are case-insensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.