CYP CMPRO-U4H4CVPL Bedieningshandleiding - Pagina 15
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CYP CMPRO-U4H4CVPL. CYP CMPRO-U4H4CVPL 20 pagina's. 4k2k 4×4 hdmi matrix over cat5e/6/7
Pagina afdrukken
Once in the command line interface (CLI) type "telnet", then the IP
address of the unit and "23", then hit enter.
Note: The IP address of the Matrix can be displayed on the device's
LCM monitor by pressing the Menu button twice.
This will bring us into the device which we wish to control. Type "HELP"
to list the available commands.
Type "IPCONFIG" To show all IP configurations. To reset the IP,
type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of
commands, see Section 6.7).
Note: Any commands will not be executed unless followed by a
carriage return. Commands are case-insensitive. If the IP is changed
then the IP Address required for Telnet access will also change
accordingly.
10