- ページ 8

楽器アンプ Ashdown ROOTMASTER RM-500-EVO IIのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ashdown ROOTMASTER RM-500-EVO II 16 ページ。

ROOTMASTER EVO II

USER GUIDE

Inputs

There are two choices of instrument input, these are marked passive and

active. The passive input is high sensitivity and high impedance to suit

passive bass instruments. The active input is much lower sensitivity and

impedance to accurately match the signal from active bass instruments

i.e. Those with a built in battery powered pre-amp.

Input control

The input control sets the signal level through the preamp in conjunction

with the input level vu meter. This is adjusted to give a reading of 0vu on

the meter for average playing dynamics with occasional peaks into the

red region. Please note that the setting of this may have to be re-adjusted

after modification of the E.Q. controls.

Shape

With this button in a fixed E.Q. is superimposed on the pre-amp to give a

bass & high boost to the sound. This gives +8db at 50hz and gives +10db

at 10khz.

E.Q.

This button switches the equalisation section in or out i.e. the Bass, Mid-

dle and Treble controls and the two rotary controls placed between these.