- ページ 5

音楽機材 Ashly CLX-52のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ashly CLX-52 12 ページ。 Compressor/limiter
Ashly CLX-52 にも：テクニカルノートと仕様 (2 ページ), 取扱説明書 (12 ページ), テクニカルノートと仕様 (2 ページ)

Operator Manual – CLX-52 Compressor/Limiter

A great deal of time was spent developing a wide-bandwidth, ultra-low-distortion, low noise

VCA (voltage controlled amplifier). The result is the CLX-52, a versatile and highly

listenable compressor/limiter suitable for use in professional sound reinforcement, recording

and broadcasting.

The CLX-52 has three different connector types:

1/4" inch stereo TRS jacks

Three pin XLR type connectors

Euroblocks

These three connectors facilitate interfacing to most professional audio products. Both

inputs and outputs can be used balanced or unbalanced.

Your CLX-52 Compressor/Limiter is provided with three different connector types:

1. 1/4 inch stereo phone jacks (TRS)

2. Three pin XLR type connectors

3. Euroblock Connector

When possible, balanced connections are recommend between all components in your

system, as this eliminates ground-loop induced hum and noise.

Unbalanced Connections and Grounding

If you must use unbalanced connectors, the negative lead of the connector should be tied to

the ground lead. Using unbalanced connections could result in chassis ground-loop noise.

Altering the signal/chassis ground relationship in equipment connected to your CLX unit

may eliminate the noise.

CLX Connector Polarities

Page - 5

Safety Instructions – 3

Introduction - 4

CLX-52 – 5

Connectors & Cables – 5

Grounding

Physical Description - 6

Installation – 7

Typical Applications - 8

Troubleshooting - 9

Dimensions - 9

Specifications - 10

Warranty - 11