Ashly CLX-52 Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Музичне обладнання Ashly CLX-52. Ashly CLX-52 12 сторінок. Compressor/limiter
Також для Ashly CLX-52: Технічні примітки та специфікації (2 сторінок), Посібник з експлуатації (12 сторінок), Технічні примітки та специфікації (2 сторінок)

Operator Manual – CLX-52 Compressor/Limiter

A great deal of time was spent developing a wide-bandwidth, ultra-low-distortion, low noise

VCA (voltage controlled amplifier). The result is the CLX-52, a versatile and highly

listenable compressor/limiter suitable for use in professional sound reinforcement, recording

and broadcasting.

The CLX-52 has three different connector types:

1/4" inch stereo TRS jacks

Three pin XLR type connectors

Euroblocks

These three connectors facilitate interfacing to most professional audio products. Both

inputs and outputs can be used balanced or unbalanced.

Your CLX-52 Compressor/Limiter is provided with three different connector types:

1. 1/4 inch stereo phone jacks (TRS)

2. Three pin XLR type connectors

3. Euroblock Connector

When possible, balanced connections are recommend between all components in your

system, as this eliminates ground-loop induced hum and noise.

Unbalanced Connections and Grounding

If you must use unbalanced connectors, the negative lead of the connector should be tied to

the ground lead. Using unbalanced connections could result in chassis ground-loop noise.

Altering the signal/chassis ground relationship in equipment connected to your CLX unit

may eliminate the noise.

CLX Connector Polarities

Page - 5

Safety Instructions – 3

Introduction - 4

CLX-52 – 5

Connectors & Cables – 5

Grounding

Physical Description - 6

Installation – 7

Typical Applications - 8

Troubleshooting - 9

Dimensions - 9

Specifications - 10

Warranty - 11