- ページ 6

カードリーダー ASIS Technologies R300 seriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ASIS Technologies R300 series 10 ページ。 Nfc reader

Reinsert reader front to

base by set the bottom.

Align reader pigtail cable

accordingly. Push to front

top to snap into the base.

Tighten bottom screw

1.6

Operation Guide

Keeping the card in parallel to the R300 reader a maximum read range

can be obtained. The Reader will still be able to read Card when the

card is presented at an angle but this will result in the reducing of read

range.

Card and PIN operation (Model 303)

a) When the Green Led is blinking after presenting card, the means that

PIN is request. Key in PIN and follows by "#" key

b) Key in PIN + 1 for PIN DURESS (Example PIN is 1234, for duress

activation, key pin 1235)

When the reader is powered-up, the LED and the Buzzer will respond.

Note that the maximum PIN is up to 6 digit.