ASIS Technologies R300 series 사용자 설명서 - 페이지 6
{카테고리_이름} ASIS Technologies R300 series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ASIS Technologies R300 series 10 페이지. Nfc reader
페이지 인쇄Reinsert reader front to
base by set the bottom.
Align reader pigtail cable
accordingly. Push to front
top to snap into the base.
Tighten bottom screw
1.6
Operation Guide
Keeping the card in parallel to the R300 reader a maximum read range
can be obtained. The Reader will still be able to read Card when the
card is presented at an angle but this will result in the reducing of read
range.
Card and PIN operation (Model 303)
a) When the Green Led is blinking after presenting card, the means that
PIN is request. Key in PIN and follows by "#" key
b) Key in PIN + 1 for PIN DURESS (Example PIN is 1234, for duress
activation, key pin 1235)
When the reader is powered-up, the LED and the Buzzer will respond.
Note that the maximum PIN is up to 6 digit.
6