- ページ 12
ツール Bluerock Tools PTK-300のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Bluerock Tools PTK-300 20 ページ。 Pipe threading kit for pd- 300/ptm-300
ページを印刷するP T K - 3 0 0
P I P E
T H R E A D I N G
o
o
o
o
o
o
o
RUNNING THE OPTIONAL POWER DRIVE WITH PTK-300 Pipe Threading Kit
Ø
Do all pre-operational and operational safety checks from Chapter 1.
Ø
Consider your security and stability as well as the orientation of the machine in the work area.
o
Ø
Ensure the machine handles are free of grease or oil.
Ø
Select appropriate die head and die depth for the specific pipe you are threading.
o
K I T
Slide throwout lever back so that tongue of clamp lever washer will drop in slot under size bar.
Adust die head size bar until the index line on lock screw or link is aligned with proper size mark
on size bar. For bolt threads, align index line with BOLT line on size bar.
Tighten clamp lever.
If oversize or undersize threads are required, set the index line in direction of OVER or UNDER
size mark on size bar.
Place the diehead assembly back in the sledge.
Consider the work surface material, condition, strength, density and rigidity. These factors
directly affect the tools operation and user safety.
Inspect the dies to ensure they are sharp and in the correct position.
9