- ページ 5

アダプター d&b audiotechnik Z5356 E5のPDF 取付方法をオンラインで閲覧またはダウンロードできます。d&b audiotechnik Z5356 E5 7 ページ。 Ball joint adapter

d&b Z5356 E4/E5 Ball joint adapter , Mounting instructions (1.2 EN)

Attaching the ball joint adapter to the cabinet

1. Attach the ball joint adapter to the M10 threaded insert on the

rear panel of the cabinet.

2. Fix the adapter to the cabinet by tightening the locking device

[C] accordingly.

Alternatively an open-ended spanner (size #17) can be used

for this purpose.

1.4. Z5038 Fixing plate M10

The Z5038 Fixing plate M10 can be used to mount the E4 or E5

cabinets to walls, ceilings or other surfaces.

Note: Refer to the respective mounting instructions which are

supplied together with the fixing plate.

If the cabinets are mounted to a wall, both horizontal or vertical

mounting is possible. If the cabinets are mounted to a ceiling, the

horizontal setup is recommended.

The following mounting options and angle settings are applicable

no matter whether the cabinets are mounted to walls or ceilings or

other suitable surfaces.

E4 loudspeaker

For the E4 cabinet, angles can be set from 0° to –50° (vertical

setup) or from 0° to –80° (horizontal setup).

E5 loudspeaker

For the E5 cabinet, angles can be set from 0° to –35° (vertical

setup) or from 0° to –75° (horizontal setup).