d&b audiotechnik Z5356 E5 설치 지침 - 페이지 5

{카테고리_이름} d&b audiotechnik Z5356 E5에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. d&b audiotechnik Z5356 E5 7 페이지. Ball joint adapter

d&b Z5356 E4/E5 Ball joint adapter , Mounting instructions (1.2 EN)

Attaching the ball joint adapter to the cabinet

1. Attach the ball joint adapter to the M10 threaded insert on the

rear panel of the cabinet.

2. Fix the adapter to the cabinet by tightening the locking device

[C] accordingly.

Alternatively an open-ended spanner (size #17) can be used

for this purpose.

1.4. Z5038 Fixing plate M10

The Z5038 Fixing plate M10 can be used to mount the E4 or E5

cabinets to walls, ceilings or other surfaces.

Note: Refer to the respective mounting instructions which are

supplied together with the fixing plate.

If the cabinets are mounted to a wall, both horizontal or vertical

mounting is possible. If the cabinets are mounted to a ceiling, the

horizontal setup is recommended.

The following mounting options and angle settings are applicable

no matter whether the cabinets are mounted to walls or ceilings or

other suitable surfaces.

E4 loudspeaker

For the E4 cabinet, angles can be set from 0° to –50° (vertical

setup) or from 0° to –80° (horizontal setup).

E5 loudspeaker

For the E5 cabinet, angles can be set from 0° to –35° (vertical

setup) or from 0° to –75° (horizontal setup).