- ページ 4

リモコン Ambient Technologies RCMHLのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Ambient Technologies RCMHL 7 ページ。 Hi/lo remote control

Setting Privacy Security Code on Transmitter and Receiver

The remote receiver and transmitter security codes are preset at the factory. A privacy code can be set into the

system to prevent accidental operation by other transmitters in the vicinity using the following procedure:

1. Press the two push buttons on the receiver simultaneously and then press ON/HI button on the transmitter

once.

2. The receiver LED will blink twice and the security code is now set.

3. The system is ready to operate.

Remote Transmitter:

Installing Batteries:

The remote transmitter uses three (3) "AAA"-

size batteries. To install batteries,

1. Press down the battery door tab and

lift up and remove the battery door.

2. Install the batteries as indicated in the

receiver cover.

3. Close the battery door by snapping in

place.

4. The batteries should be replaced at

f i r e - p a r t s . c o m

least once every 6 months or when the

battery indicator flashes.

Reset Button:

1. The reset button can be used to reset the systems such as the clock setting. The reset button is located

behind the battery door cover.

2. Using a paper clip, press the button and the system will reset and go into clock setting mode. Follow the

instructions on how to set the time in the next section.

50D0033 Rev 1 June 2002

Reset Button

(Behind battery door tab)

Page 4 of 7

Battery

Door

Tab

Back of the Transmitter

Ambient Technologies

Monessen Hearth Systems

A Division Of