- ページ 5

リモコン Ambient Technologies RCMHLのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Ambient Technologies RCMHL 7 ページ。 Hi/lo remote control

ページを印刷する

Transmitter:

General:

The RCMHL is a manual remote control with flame height control.

The transmitter will operate the remote receiver from 1foot to a maximum of 30 feet.

The distance is reduced when batteries are low or when the receiver is inside a metal

enclosure.

Initial start up:

1. After initial power up or

RESET button is pressed,

the transmitter is reset.

The reset button is located

inside the battery door.

2. During system reset, all

features of the LCD will be visible. After one second, the LCD will be

initialized and operational. Typical reset displays are shown. Note that the

temperature scale is degree F.

3. When reset the transmitter is operating in the manual mode. The time and room temperature are shown.

Setting Clock:

f i r e - p a r t s . c o m

1. In clock setting mode, only clock and degree is displayed. Press ON/HI to select item (hour, minute or

degree). Selected item is flashing. Press OFF/LO to change. After setting the time, press ON/HI to enter

manual mode.

Manual Mode:

1. Press and hold the ON/HI button to turn on the appliance and increase the flame height. Press and hold the

OFF/LO button to decrease the flame height and to turn it off.

Low-battery detection:

1. Battery voltage is checked once a minute. When the battery voltage drops to a certain level, the low-battery

warning will come on, and the transmitter will turn off the appliance. The transmitter will not function

anymore until fresh batteries are installed.

2. When the batteries are low, the LCD shows a low battery indicator. The low battery warning will be

displayed in any mode.

3. The transmitter will not operate with low batteries. Change the battery before the battery is too weak for

normal operation. TURN THE UNIT OFF BEFORE REPLACING BATTERIES.

Child-proof protection:

1. Press and hold ON/HI and OFF/LO buttons simultaneously for 3 seconds to enter child-proof mode.

2. The transmitter will not work mode until child-proof mode is deactivated by pressing the ON /HI and

OFF/LO buttons simultaneously for 3 seconds again to exit child-proof mode.

Transmitter Thermal Shutdown:

If transmitter measures a room temperature exceeding 99 degrees

Fahrenheit, the LCD will display "HI" and the transmitter will turn

off the appliance.

50D0033 Rev 1 June 2002

OPERATIONS:

Page 5 of 7

Ambient Technologies

A Division Of

Monessen Hearth Systems