Ambirad AMBITEC PLUS 매뉴얼 - 페이지 4

{카테고리_이름} Ambirad AMBITEC PLUS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambirad AMBITEC PLUS 11 페이지. Energy saving electronic control panel

페이지 인쇄

AMBITEC

3 General setting instructions

The AmbiTec Plus control panel is

programmed with default settings as shown

in the text. All default settings may be

changed within the adjustment ranges of

the windows.

The control panel is shipped with all

password levels set to '0000' and all

adjustments can be made. If three

password levels have been set, pressing the

Select button will prompt the password

request. Without entering a password you

will be able to the windows but no changes

can be made.

Pressing the Select button moves the

display through screens. Pressing the Enter

button will save the program. It is not

necessary to press the Enter button after

each change is made, you make all

necessary changes in any or all windows

and then press the Enter button to save all

changes. When the Enter button is pressed

the window it will revert to the standard

display. If further changes are required it

will be necessary to press the Select button

as many times as necessary to access any

further windows that require changing.

The

are used to move through settings

within a window and the

select a value for that setting.

If at any time from pressing the Select

button that a period of 45 seconds elapses

between any button presses, the unit will

save all changes made up to the last screen

and the panel will revert to it's standard

display. It will then be necessary to press

the Select button to get to any other

screens that required adjustments in their

settings.

Clock on times should be set to the normal

occupancy times regardless if preheat is set

or not.

PLUS

ENERGY SAVING ELECTRONIC CONTROL PANEL

4 Display windows (Brief guide)

There are twenty-six different windows available, system parameters may be set in twenty

four of them. The two that are fixed are the normal display and the software batch

identification window.

1. Normal display.

2. Normal display adjust

3. Advance ON/OFF adjust

4. Adjust timers

5. Adjust language

6. Adjust year

7. Adjust frost temperature

8. Adjust heat < > vent differential

9. Adjust GM44 differential temperature

10. Adjust AmbiTec Plus type

11. Adjust reset type

12. Adjust V3 vent

13. Adjust high fire time

14. Adjust pre-heat mode

15. Adjust pre-heat time

16. Adjust night temperature band

17. Adjust night temperature band

18. Adjust forward clock 1 hour at 01:00 ON

are used to

19. Adjust retard clock 1 hour at 01:00 ON

20. Adjust holiday 1 period

21. Adjust holiday 2 period

22. Adjust holiday 3 period

23. Adjust holiday 4 period

24 Adjust 'Hand

25. Software type; A non-editable display of software issue number'

26. Adjust Key 3 password setting level 3

27. Adjust Key 2 password setting level 2

28. Adjust Key 1 password setting level 1

(No default)

(Default = English)

(Default = 1998)

(Default = 4˚C)

(Default = 6˚C)

(Default = 2˚C)

(Default = 00)

(Default = 01)

(Manual or Auto)

(Default = 30)

(Default = 02)

(Default = 1:00 hour)

(Default = 16˚C)

(Default = 03˚C)

(No default)

(NB Frost protection only)

(No default)

(default 30 min. adjust up to 2 hours)

(Default 0000)