ACR Electronics PATHFINDER 3 SART (SEARCH AND RESCUE TRANSPONDER) 제품 지원 매뉴얼 - 페이지 10
{카테고리_이름} ACR Electronics PATHFINDER 3 SART (SEARCH AND RESCUE TRANSPONDER)에 대한 제품 지원 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR Electronics PATHFINDER 3 SART (SEARCH AND RESCUE TRANSPONDER) 19 페이지. Search and rescue transponder (sart)
페이지 인쇄7.0
Pole Mounted SART
1. The PathFinder
sea level (see figure 5).
2. To operate, simply turn the bottom cap of the SART to release the pole.
3. Pull the pole downward and extend it to its maximum length.
4. To lock pole in position pull firmly across pole joints while twisting slightly.
5. Tie Lanyard to life raft to allow retrieval should the SART fall into the water.
6. Push SART through life raft observation port and place foot of pole in pocket at base of
life raft.
7. Use life raft ties to hold SART pole near vertical.
8. Ensure SART is not obscured by metal objects or inflatable Radar reflectors.
9. Periodically check to see if SART is still vertical.
TM
is supplied with a telescopic pole to raise the SART one meter above
3
Figure 5
10
1 Meter
Minimum
Y1-03-0170 Rev. B