ACR Electronics PATHFINDER 3 SART (SEARCH AND RESCUE TRANSPONDER) Product Support Manual - Page 10

Browse online or download pdf Product Support Manual for Marine Radio ACR Electronics PATHFINDER 3 SART (SEARCH AND RESCUE TRANSPONDER). ACR Electronics PATHFINDER 3 SART (SEARCH AND RESCUE TRANSPONDER) 19 pages. Search and rescue transponder (sart)

Print Page
7.0

Pole Mounted SART

1. The PathFinder
sea level (see figure 5).
2. To operate, simply turn the bottom cap of the SART to release the pole.
3. Pull the pole downward and extend it to its maximum length.
4. To lock pole in position pull firmly across pole joints while twisting slightly.
5. Tie Lanyard to life raft to allow retrieval should the SART fall into the water.
6. Push SART through life raft observation port and place foot of pole in pocket at base of
life raft.
7. Use life raft ties to hold SART pole near vertical.
8. Ensure SART is not obscured by metal objects or inflatable Radar reflectors.
9. Periodically check to see if SART is still vertical.
TM
is supplied with a telescopic pole to raise the SART one meter above
3
Figure 5
10
1 Meter
Minimum
Y1-03-0170 Rev. B