Flite FL042T 조립 설명서

{카테고리_이름} Flite FL042T에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Flite FL042T 4 페이지.

ACTIVE ASSEMBLY GUIDE

Please read these instructions carefully. Each bike comes with an Owners' Manual that

contains a great deal of information and tips, including a comprehensive guide to care

and maintenance that we recommend you read carefully.

Our bikes are fully adjusted and checked over at the factory. The handlebars may be

removed or assembled in the bike and turned through 90 degrees. the pedals

removed and in some cases the front wheel will have been removed too. It is a relative-

ly simple operation to re-assemble these parts, however if you do not feel competent

to do this you should ask someone who is, as it is important that these simple tasks are

done correctly for the integral safety of the bike.

Please remove all packaging very carefully, especially if using a knife or sharp blade.

Take care not to scratch any of the parts of the bike or slash the tyres.

We suggest that you keep hold of the carton in case you need to return the bike.

Getting Started

Open the carton from the top and carefully remove the bicycle. Take care not to

scratch any of the parts of the bike or cut the tyres. Remove the straps and protective

wrapping from the bicycle. Inspect the bicycle, all accessories and parts for possible

shortages.

We strongly recommend that the threads and all moving parts in the parts package be

lubricated prior to installation. Do not discard packing materials until assembly is com-

plete to ensure that no required parts are accidentally discarded.