Flite FL042T 조립 설명서 - 페이지 2

{카테고리_이름} Flite FL042T에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Flite FL042T 4 페이지.

Saddle

Using the supplied flat spanner loosen the seat

clamp bolt and insert the seatpost into the seat

tube.

Adjust the saddle height to suit the comfort of

the rider but ensure the minimum insertion

mark on the seat post remains completely

within the seat tube.

Tighten the seat clamp bolt to lock the seat in

place.

Front wheel installation

Squeeze the brake arms (A) together.

Lift the brake cable guide (B) out of the

guide bracket (C) to release the brake arms.

Rotate the bicycle forks so that the brakes are to the fore.

Remove the protective plastic cap from the end of the

Insert the end of the stem into the front forks with the stem

Use the provided hex wrench to tighten the stem bolt just

Align the handlebarswith the fork legs, ensure the minimum

insertion mark is completely within the head tube and then

Handlebars and stem

enough to hold the stem in position.

fully tighten the stem bolt.

handle bar stem.

pointing forwards.