AMC 25100 설치 및 사용 설명서 지침 - 페이지 5
{카테고리_이름} AMC 25100에 대한 설치 및 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AMC 25100 8 페이지. Multi-channel power amplifier
AMC 25100에 대해서도 마찬가지입니다: 설치 및 사용 설명서 지침 (8 페이지), 설치 및 사용 설명서 지침 (8 페이지)
페이지 인쇄
REAR PANEL CONNECTIONS
1. MAINS INLET
Connect the AC line cord in to the mains inlet
and plug the AC cord plug into a nearby wall
outlet that provides the correct AC power line
voltage.
2. INPUT LEVEL CONTROLS
Each channel of the 2N100-5/25100 has its own,
independent level control. Before turning on the
2N100-5/25100 for the first time, make sure that
all level controls are set to their fully clockwise
position. These controls can be used for various
functions. For example, they can be used to
match the levels of loudspeakers in a multi-room
installation, or to lower the sensitivity of the
power amplifier, so that the volume control on
pre-amplifier is at a more convenient and usable
position. They can also be used to optimise the
balance in a stereo system.
3. LINE OUTPUTS
Each input has an accompanying line output
which will pass the signal onto another amplifier
input or other line-level device.
4. LINE INPUTS
There are five RCA phono connectors on the
back panel that connect to the inputs of each of
the power amplifiers.
5. LOUDSPEAKER TERMINALS
The 2N100-5/25100 is equipped with binding
post type speaker terminals that are desiged to
handle the extremely high peak currents that this
amplifier is capable of giving. Connections from
these terminals to the loudspeakers should be
made with heavy-duty wire. Standard wire of 16
gauge or thicker is recommended especially if
low impedance loudspeakers are used.
FRONT PANEL CONTROLS
1. POWER SWITCH
The press button switch marked power can be
used to switch the 2N100-5/25100 on or off.
When the 2N100-5/25100 is switched on, the
small indicator above the power switch will glow
green.
4