FLO-DYNAMICS TSD440 매뉴얼 - 페이지 12

{카테고리_이름} FLO-DYNAMICS TSD440에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FLO-DYNAMICS TSD440 20 페이지. Transmission fluid dipstick x-changer
FLO-DYNAMICS TSD440에 대해서도 마찬가지입니다: 빠른 시작 지침 (3 페이지)

페이지 인쇄

III. Operating Procedures

III. OPERATING PROCEDURES

DANGER

• Vent vehicle's exhaust away from work area.

• Do not breathe exhaust.

• Read, understand and follow Safety Instructions in the front pages of this manual and on

product safety labels.

WARNING

• Wear safety goggles and protective clothing, user and bystander.

• Do not operate the TSD440 in the vicinity of open containers of flammable liquids such

as gasoline.

• This machine is equipped to operate on 12-volt DC power only.

• Do not smoke, place metal tools on battery or allow a spark or flame in vicinity of battery.

• Clean battery terminals before hooking the machine's battery clips to them. During

cleaning, keep airborne corrosion from eyes, nose and mouth.

• Keep yourself, clothing, battery cables and service hoses clear of moving parts such as

fan blades, belts and pulleys.

• Unless instructed otherwise, set parking brake and put gear selector in park.

• Do not leave a running vehicle unattended.

• Keep the service hoses away from hot or moving engine parts. Hoses can split or burst

causing fluid to be expelled.

• Tighten all connections properly. Insufficient or excessive torque can result in fluid

leakage.

CAUTION

• Use this equipment only as described in this manual. Use only the manufacturer's

recommended attachments.

• Care should be taken to arrange the battery cables and service hoses so that they will

not be tripped over or pulled.

• The TSD440 is fully automatic. Refer to your control panel at all times.

•Flushing high mileage cars that have not been previously serviced can cause operating

problems in the transmission.

• Never pull on the power cables or service hoses to transport the TSD440. Damage may

occur to these components, or machine may tip over.

• Servicing, transporting, or storing this machine in an attitude other than the normal

operating position can result in fluid spillage and/or component damage.

Printed in the U.S.A. for Flo-Dynamics ®

Flo-Dynamics

TSD440™

Operations Manual