AMCOL 6000E 운영자 매뉴얼 - 페이지 10

{카테고리_이름} AMCOL 6000E에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMCOL 6000E 19 페이지. Electronic timing controller for forming and fabricating
AMCOL 6000E에 대해서도 마찬가지입니다: 운영자 매뉴얼 (6 페이지)

페이지 인쇄
AMCOL 6000E 운영자 매뉴얼
No or Low Dispersing Air
•
Manifolded dispersing air pressure set too low: adjust.
•
Air hose is kinked or cut: repair or replace.
•
Spray tip is clogged: clean or replace.
•
Spray tip is damaged: replace.
Air in Liquid Line
•
Fluid line is not properly attached to pump: replace hose or fitting.
•
Injector seal is failing: rebuild or replace.
Liquid Drains from Spray Tip
•
Injector check valve is failing: rebuild or replace.
•
Liquid line in single point nozzle assembly is damaged or disconnected: replace

8 T60A Posi-pump Troubleshooting

No Liquid
•
Pump is turned off: turn liquid adjustment screw counterclockwise.
•
Pump is seized: remove, clean, and rebuild.
•
Reservoir is empty: fill.
•
Air pressure is too low: adjust to over 60 PSI.
Bubbles from Injectors
•
Air seals are leaking: replace.
•
Exit fitting is leaking: replace.
Liquid Drains from Injector Outlet
•
Exit fitting is leaking: replace.
•
Evacuation valve is ineffective: clean or replace.
•
Biaxial hose is trimmed incorrectly: be sure hose is cut straight with no burrs or
deformities.
6000E ELECTRONICALLY CONTROLLED PRECISION LUBRICATION SYSTEM
Operator's Manual
P A G E | 9