Floe VSD 8000 조립 지침 매뉴얼 - 페이지 7

{카테고리_이름} Floe VSD 8000에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Floe VSD 8000 8 페이지. Full length pontoon & tri-toon bunks large lifts
Floe VSD 8000에 대해서도 마찬가지입니다: 조립 설명서 (12 페이지), 조립 지침 매뉴얼 (8 페이지), 조립 지침 매뉴얼 (16 페이지)

페이지 인쇄
Floe VSD 8000 조립 지침 매뉴얼
POSITION THE (4) CENTER CRADLE PAD ASSEMBLIES, (2) PER CRADLE BEAM, AND (2) OUTER CRADLE PAD
ASSEMBLIES BASED ON THE WIDTH OF THE BOAT. PADS MUST BE POSITIONED SO THAT THEY UTILIZE
THE CHINE OF THE HULL, AS THIS WILL HELP TO KEEP THE CRADLE PAD ASSEMBLIES VERTICAL (FIGURE
2.4 & 2.4A).
UPRIGHTS MAY HAVE TO BE CUT TO ALLOW FULL
TRAVEL OF CRADLE ONCE FINAL PLACEMENT IS
ESTABLISHED.
NOTE:
SHEET 7 OF 8
BUNK/CRADLE
DISCLAIMER
DUE TO THE
LARGE VARIETY
OF BOAT HULL
DESIGNS, WE
STRONGLY
RECOMMEND
THAT YOU
CONSULT WITH
YOUR BOAT'S
MANUFACTURER
TO INSURE
THAT YOU ARE
SUPPORTING
FIGURE 2.4
YOUR BOAT
PROPERLY TO
AVOID ANY
POTENTIAL
DAMAGE.
PAD