Floe VSD 8000 Montagehandleiding - Pagina 7

Blader online of download pdf Montagehandleiding voor {categorie_naam} Floe VSD 8000. Floe VSD 8000 8 pagina's. Full length pontoon & tri-toon bunks large lifts
Ook voor Floe VSD 8000: Montagehandleiding (12 pagina's), Montagehandleiding (8 pagina's), Montagehandleiding (16 pagina's)

Pagina afdrukken
Floe VSD 8000 Montagehandleiding
POSITION THE (4) CENTER CRADLE PAD ASSEMBLIES, (2) PER CRADLE BEAM, AND (2) OUTER CRADLE PAD
ASSEMBLIES BASED ON THE WIDTH OF THE BOAT. PADS MUST BE POSITIONED SO THAT THEY UTILIZE
THE CHINE OF THE HULL, AS THIS WILL HELP TO KEEP THE CRADLE PAD ASSEMBLIES VERTICAL (FIGURE
2.4 & 2.4A).
UPRIGHTS MAY HAVE TO BE CUT TO ALLOW FULL
TRAVEL OF CRADLE ONCE FINAL PLACEMENT IS
ESTABLISHED.
NOTE:
SHEET 7 OF 8
BUNK/CRADLE
DISCLAIMER
DUE TO THE
LARGE VARIETY
OF BOAT HULL
DESIGNS, WE
STRONGLY
RECOMMEND
THAT YOU
CONSULT WITH
YOUR BOAT'S
MANUFACTURER
TO INSURE
THAT YOU ARE
SUPPORTING
FIGURE 2.4
YOUR BOAT
PROPERLY TO
AVOID ANY
POTENTIAL
DAMAGE.
PAD