Amcrest SmartHome AL-KIT1-PP 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} Amcrest SmartHome AL-KIT1-PP에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcrest SmartHome AL-KIT1-PP 11 페이지. Home alarm system
Amcrest SmartHome AL-KIT1-PP에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (4 페이지)

페이지 인쇄

Installing the Motion Sensor

Location Tips:

• Install the motion sensor indoors on a

ﬂat surface.

• The motion sensor should be placed 6

to 8 feet high to prevent it from falling

and out of reach of children or pets.

• To detect smaller objects, it is

recommended to use one of the angled

sides of the bracket.

Install Using the Mounting Adhesive

Use the included two-sided mounting adhesive to

install the sensor.

1. Peel one portion of the circular

mounting adhesive and adhere

it to the center portion of the

sensor.

2. Peel the other portion of the

mounting adhesive and adhere

it to a ﬂat surface.

The sensor can be placed on

Note:

a table or at a 45° angle using the

included bracket.

26 ft

Install Using the Mounting Bracket

The bracket oﬀers two separate angles for the sensor to face.

Use the included two-sided mounting adhesive to install the

sensor to the bracket.

1. Peel one portion of the circular mounting

adhesive and adhere it to the center portion

of the sensor.

2. Peel the other portion of the circular

mounting adhesive and adhere it to the back

of the bracket.

3. Place another mounting adhesive to

the bracket to achieve the desired angle.

4. Peel the other portion of the

mounting adhesive and place the

bracket onto a ﬂat surface.

Note:

An Amcrest Smart Home camera

can be linked to either sensor if needed.

For more information, please visit

amcrest.com/support