Amcrest SmartHome AL-KIT1-PP Hızlı Başlangıç Kılavuzu - Sayfa 9
Güvenlik Sistemi Amcrest SmartHome AL-KIT1-PP için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Amcrest SmartHome AL-KIT1-PP 11 sayfaları. Home alarm system
Ayrıca Amcrest SmartHome AL-KIT1-PP için: Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar)
Sayfayı Yazdır
Installing the Motion Sensor
Location Tips:
• Install the motion sensor indoors on a
flat surface.
• The motion sensor should be placed 6
to 8 feet high to prevent it from falling
and out of reach of children or pets.
• To detect smaller objects, it is
recommended to use one of the angled
sides of the bracket.
Install Using the Mounting Adhesive
Use the included two-sided mounting adhesive to
install the sensor.
1. Peel one portion of the circular
mounting adhesive and adhere
it to the center portion of the
sensor.
2. Peel the other portion of the
mounting adhesive and adhere
it to a flat surface.
The sensor can be placed on
Note:
a table or at a 45° angle using the
included bracket.
26 ft
17
Install Using the Mounting Bracket
The bracket offers two separate angles for the sensor to face.
Use the included two-sided mounting adhesive to install the
sensor to the bracket.
1. Peel one portion of the circular mounting
adhesive and adhere it to the center portion
of the sensor.
2. Peel the other portion of the circular
mounting adhesive and adhere it to the back
of the bracket.
3. Place another mounting adhesive to
the bracket to achieve the desired angle.
4. Peel the other portion of the
mounting adhesive and place the
bracket onto a flat surface.
Note:
An Amcrest Smart Home camera
can be linked to either sensor if needed.
For more information, please visit
amcrest.com/support
18