Flomec G Series 제품 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Flomec G Series에 대한 제품 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Flomec G Series 20 페이지. Industrial and chemical models
Flomec G Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지), 제품 소유자 매뉴얼 (20 페이지)

페이지 인쇄

This manual will assist you in installing and maintaining your FLOMEC G-Series

Sanitary Turbine. For best results, take the time to fully acquaint yourself with all

information about all components of your G-Series Sanitary Turbine. If you need

assistance, contact the distributor from whom you purchased your turbine.

Product Description

FLOMEC G-Series Sanitary Turbine flowmeters are volumetric flow measurement

devices. The moving fluid is used to turn a rotor, which is suspended in the flow

stream. The rotating speed of the rotor is proportional to the fluid velocity or

flowrate. As the blades from a spinning rotor pass by a magnetic sensor, an AC

voltage pulse is generated and transmitted to the readout instrument. Each pulse

is equal to a given volume of liquid; therefore "x" number of pulses are equal to a

gallon, litre, pound, barrel, etc.

Turbine Sizing

FLOMEC G-Series Sanitary Turbines are identified by the internal diameter of the

inlet and outlet.

Model 100

Model 100L

Model 150

Model 150L

Model 200

Model 200L

Turbine flowmeters should be sized in accordance to the actual flowrate and not

the process pipe size. For example, a process having a flowrate of 10-20 GPM in

a 1-1/2 in. process line requires Model 100 OR 100L turbine flowmeter.

Another important factor to take into consideration when sizing a turbine flowmeter

is instantaneous flowrate. This is extremely important when sizing a turbine

flowmeter where the volume is measured per hour or per day. For example, an

application where the total output is 500 barrels per day, occurring in a 5-hour

period; the recommended turbine flowmeter should be sized according to the

instantaneous flowrate:

(500 – 5) x 24 or 2,400 barrels per day

Thus, requiring a 1-1/2 inch turbine flowmeter.

GENERAL INFORMATION

1 in.

(6.7-67 GPM)

1 in.

(6.7-67 GPM)

1-1/2 in.

(17.7-177 GPM)

1-1/2 in.

(17.7-177 GPM)

2 in.

(33-330 GPM)

2 in.

(33-330 GPM)