Flomec G2 소유자 매뉴얼 - 페이지 5
{카테고리_이름} Flomec G2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Flomec G2 16 페이지. Pulse access, external power & scaled pulse module
페이지 인쇄
SPECIFICATIONS
MECHANICAL
Housing
Material
Strain Relief
Housing Port Thread
Cable
Cable Length
Operating
Temperature
Higher Process Fluid
Temperatures
Obtainable with G2
Stainless Steel
Meters
Storage
Temperature
POWER
Voltage Minimum
Voltage Maximum
Isolated
PULSE OUTPUT
Type
* External Pull-up
Voltage
** Internal Pull-up
Voltage
* Note: Customer supplied external voltage with separate power supply and a minimum
external pull up resistance of 820 ohms.
** Note: When configured for internal pull up resistor, no external pull up resistor is required.
Internal pull up is fixed at 100K ohm.
Hubble PG7. Grip range 0.11-0.26
Female 1/2-20 UNF-2B (Compatible with PG7)
Belden 9363 (22 AWG-3 conductor
with drain wire and shield)
10 ft. (3m), provided
0° to +140°F (-18° to +60°C)
When installed on G2 Stainless Steel Flowmeters, see
Ambient and Fluid Temperature Limits graph on next
page for higher process fluid temperature Limits.
If wider process fluid temperature ranges are desired,
reference information on FLOMEC® Remote Kits.
-40° to +180°F (-40° to +82°C)
Open Collector (NPN)
5
Nylon 6-6
5.0 VDC
26 VDC
No
5.0 to 26 VDC
5.0 to 26 VDC