Flomec G2 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Flomec G2. Flomec G2 16 сторінок. Pulse access, external power & scaled pulse module
Друкувати сторінку
SPECIFICATIONS
MECHANICAL
Housing
Material
Strain Relief
Housing Port Thread
Cable
Cable Length
Operating
Temperature
Higher Process Fluid
Temperatures
Obtainable with G2
Stainless Steel
Meters
Storage
Temperature
POWER
Voltage Minimum
Voltage Maximum
Isolated
PULSE OUTPUT
Type
* External Pull-up
Voltage
** Internal Pull-up
Voltage
* Note: Customer supplied external voltage with separate power supply and a minimum
external pull up resistance of 820 ohms.
** Note: When configured for internal pull up resistor, no external pull up resistor is required.
Internal pull up is fixed at 100K ohm.
Hubble PG7. Grip range 0.11-0.26
Female 1/2-20 UNF-2B (Compatible with PG7)
Belden 9363 (22 AWG-3 conductor
with drain wire and shield)
10 ft. (3m), provided
0° to +140°F (-18° to +60°C)
When installed on G2 Stainless Steel Flowmeters, see
Ambient and Fluid Temperature Limits graph on next
page for higher process fluid temperature Limits.
If wider process fluid temperature ranges are desired,
reference information on FLOMEC® Remote Kits.
-40° to +180°F (-40° to +82°C)
Open Collector (NPN)
5
Nylon 6-6
5.0 VDC
26 VDC
No
5.0 to 26 VDC
5.0 to 26 VDC