CO2 Meter RAD-0002-ZR 사용자 설명서 및 설치 설명서 - 페이지 10
{카테고리_이름} CO2 Meter RAD-0002-ZR에 대한 사용자 설명서 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CO2 Meter RAD-0002-ZR 18 페이지. Oxygen o2 deficiency safety alarm
CO2 Meter RAD-0002-ZR에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지)
페이지 인쇄
RDU (Remote Display Unit)
The RDU should be placed outside the enclosed area (typically next to a door) to
warn users if the oxygen level inside the enclosed area has changed. The RDU is
controlled and powered by the SEU. A strobe may be attached to the RDU.
Strobes
The RAD-0002-ZR can be equipped with strobes for additional visual alarms. Using
CAT5 cables, connect the strobes to the correct RJ45 ports on the SEU and RDU. If
O2 levels exceed AL2, the strobe will flash. If the O2 level exceeds AL3, the strobe
tempo increases. Please visit www.CO2Meter.com for strobe package. Part
Number: CM-1027.
Power
The RAD-0002-ZR comes pre-wired with a 12V power supply that plugs in to a wall
outlet. The 12V power supply can be removed and 24V DC can be wired directly to
the monitor through the terminal block. Please use a 24V DC power converter to
properly convert your AC power source.
10 | P a g e
R A D - 0 0 0 2 - Z R / M a n u a l a n d I n s t a l l a t i o n
G u i d e