CO2 Meter RAD-0002-ZR Руководство пользователя и руководство по установке - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя и руководство по установке для Система безопасности CO2 Meter RAD-0002-ZR. CO2 Meter RAD-0002-ZR 18 страниц. Oxygen o2 deficiency safety alarm
Также для CO2 Meter RAD-0002-ZR: Руководство (7 страниц)

CO2 Meter RAD-0002-ZR Руководство пользователя и руководство по установке

RDU (Remote Display Unit)

The RDU should be placed outside the enclosed area (typically next to a door) to
warn users if the oxygen level inside the enclosed area has changed. The RDU is
controlled and powered by the SEU. A strobe may be attached to the RDU.

Strobes

The RAD-0002-ZR can be equipped with strobes for additional visual alarms. Using
CAT5 cables, connect the strobes to the correct RJ45 ports on the SEU and RDU. If
O2 levels exceed AL2, the strobe will flash. If the O2 level exceeds AL3, the strobe
tempo increases. Please visit www.CO2Meter.com for strobe package. Part
Number: CM-1027.

Power

The RAD-0002-ZR comes pre-wired with a 12V power supply that plugs in to a wall
outlet. The 12V power supply can be removed and 24V DC can be wired directly to
the monitor through the terminal block. Please use a 24V DC power converter to
properly convert your AC power source.
10 | P a g e
R A D - 0 0 0 2 - Z R / M a n u a l a n d I n s t a l l a t i o n
G u i d e