ACR STOVES PR-1200e 사용 설명서 - 페이지 6

{카테고리_이름} ACR STOVES PR-1200e에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR STOVES PR-1200e 17 페이지. Electric fireplace insert range

This product has been designed to be installed as either a wall

mounted insert and /or installed secured inside a frame.

The insert should be fitted to one of the following options:

• Wall mounted - using the H bracket which is

located on the rear of the appliance. Fixings

are not supplied as these will depend of the

wall type - please ensure that you choose the

correct fixings for the wall type. The wall must

be of sound construction and be able to hold

the weight of the appliance.

• Mounted on a solid base ensuring that

combustible material is kept away from the

heater outlet.

• Fitted into a studded wall - this will need to

be finished with either plaster board or have a

plastered finish. The insert can be installed

with the facing trim flush up to the plastered

finish - see drawings below.

Installation

• Ensure that the cable is not run across the

heater and can be plugged into a mains

socket without the use of an extension cable.

A qualified electrician can extend the cable if

required.

• Ensure that the plug socket or fused spur is

easily accessible to allow the appliance to be

switched off when not in use or for

maintenance purposes.

• When building the appliance in, ensure that

the mains supply switch can be easily

isolated if required.