CoaguSense RPO Assure PT Care 빠른 참조 매뉴얼

{카테고리_이름} CoaguSense RPO Assure PT Care에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CoaguSense RPO Assure PT Care 2 페이지. Prothrombin time (pt)/inr monitoring system

페이지 인쇄

Assure® PT Care

Prothrombin Time (PT)/INR

Monitoring System

Quick Reference Guide

Getting Started and Setting Up the Meter

1. One Low and one High Control Strip should be run with each new shipment/lot of strips

received. Run controls if this has not been done yet. Controls are not required for

calibration.

2. Gather test supplies such as test strips, alcohol pads, lancets and sample transfer tubes.

3. Warm the patient's hands to increase circulation by washing the patient's hands with

warm soapy water.

4. Wipe the ﬁnger with alcohol. Dry patient's hands completely as alcohol can affect results.

Activity

Turn the meter on by pressing and holding the POWER

button on the right side of the meter. Enter/Scan login

credentials (if required by facility). Press TEST.

Conﬁrm that the Patient Strip Lot # is correct by matching

with pouch. If blank or incorrect press CHANGE then align

and touch the NFC Tag rings to the target rings on the

meter surface. If the NFC tag is not available then manually

enter the Lot # and Barcode # from the patient test strip

pouch and press CONTINUE.

Holding the round end, gently push the strip completely into

the meter. The meter warms the strip (for 25 seconds) to

operating temperature. The display shows a countdown in

seconds.

At the end of countdown, the meter will beep once and

display "APPLY SAMPLE" for 2.5 minutes.

Intended Use -

The Assure PT Care Prothrombin Time (PT)/INR Monitoring System is an in vitro diagnostic device that provides

quantitative prothrombin time (PT) results, expressed in seconds and INR units. It uses fresh capillary whole blood. It is intended for use by

health care professionals at the point of care to monitor patients who are on warfarin-type (coumarin) anticoagulation therapy. The device is

not intended to be used for screening purposes.

Display/Visual Aid

PRO