Coalesse Lagunitas Arm, Corner & Straight Back Cushion 교체 - 페이지 4
{카테고리_이름} Coalesse Lagunitas Arm, Corner & Straight Back Cushion에 대한 교체을 온라인으로 검색하거나 PDF를 다운로드하세요. Coalesse Lagunitas Arm, Corner & Straight Back Cushion 7 페이지.
페이지 인쇄
Remove Corner Back Cushions and
Arm Cushions (cont.)
5.
Remove the mounting brackets by removing the
socket head bolts from the back of the cushion.
6.
Reinstall a new cushion by reversing step 5 and
tightening the bolts to 100 in-lbs.
7.
Place the cushion assembly onto the seat frame (reversing
step 4) and insert the mounting tabs into the rectangular holes in
the rear frame rails (reversing step 3 on page 2).
8.
Ensure the tabs are inserted all the way into the rectangular
slots in the tube and then install the socket head bolts and
washers through the front mounting tabs and into the seat frame
(reversing step 2 on page 2). Tighten to 130 in-lbs.
9.
Reinstall the seat cushion (reversing step 1 on page 2).
TIP: Use cardboard to help place the seat cushion into position.
5
Arm Cushions
5
Corner Back
Cushions
SOCKET HEAD BOLT
MOUNTING
BRACKET
SOCKET HEAD BOLT
MOUNTING
BRACKET
Page 4 of 7
902507402 Rev A