Coalesse Lagunitas Arm, Corner & Straight Back Cushion Wymiana - Strona 4
Przeglądaj online lub pobierz pdf Wymiana dla Wyposażenie wnętrz Coalesse Lagunitas Arm, Corner & Straight Back Cushion. Coalesse Lagunitas Arm, Corner & Straight Back Cushion 7 stron.
Drukuj stronę
Remove Corner Back Cushions and
Arm Cushions (cont.)
5.
Remove the mounting brackets by removing the
socket head bolts from the back of the cushion.
6.
Reinstall a new cushion by reversing step 5 and
tightening the bolts to 100 in-lbs.
7.
Place the cushion assembly onto the seat frame (reversing
step 4) and insert the mounting tabs into the rectangular holes in
the rear frame rails (reversing step 3 on page 2).
8.
Ensure the tabs are inserted all the way into the rectangular
slots in the tube and then install the socket head bolts and
washers through the front mounting tabs and into the seat frame
(reversing step 2 on page 2). Tighten to 130 in-lbs.
9.
Reinstall the seat cushion (reversing step 1 on page 2).
TIP: Use cardboard to help place the seat cushion into position.
5
Arm Cushions
5
Corner Back
Cushions
SOCKET HEAD BOLT
MOUNTING
BRACKET
SOCKET HEAD BOLT
MOUNTING
BRACKET
Page 4 of 7
902507402 Rev A