Coalesse LessThanFive 빠른 매뉴얼 - 페이지 2

{카테고리_이름} Coalesse LessThanFive에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coalesse LessThanFive 2 페이지. Customer service parts

Coalesse LessThanFive 빠른 매뉴얼
Glide Replacement
TOOLS REQUIRED:
- Slotted (flat blade) screwdriver
- 10" end-cutting nippers
- Rubber mallet
- Drill and 7/16" diameter drill bit
1.
Carefully turn chair upside-down
onto rug or other soft, clean surface.
2.
To protect chair leg finish, pull out glide
by hand, if possible.
3.
If you are unable to remove glide by hand,
insert screwdriver between glide foot and chair
leg and rotate screwdriver 90 to pry glide foot
away from leg.
4.
Using nippers, grasp glide firmly between
glide foot and chair leg.
5.
Holding chair with hand, pull out glide
with nippers.
Note: If glide foot seperates from glide body
during this procedure, drill out glide body
using 7/16" diameter drill bit.
Carefully drill through center of glide body
about 1-1/4" deep. With drill power off, pull
straight up until entire glide is removed.
6.
Insert new glide into hole in bottom of leg,
then press it into leg until glide foot is flush
against bottom of leg.
Note: Use a rubber mallet if glide cannot
be installed by hand.
7.
When glide replacement is complete,
carefully turn chair rightside-up.
1
5
PULL
3
90
Glide Removal with Screwdriver and Nippers
Hard Glide
Felt Glide
Assemble Glides
4
GLIDE FOOT
GLIDE BODY
6
Page 2 of 2
902507403 Rev B