Coalesse LessThanFive Manual rápido - Página 2
Procurar online ou descarregar pdf Manual rápido para Mobiliário de interior Coalesse LessThanFive. Coalesse LessThanFive 2 páginas. Customer service parts
Imprimir página
Glide Replacement
TOOLS REQUIRED:
- Slotted (flat blade) screwdriver
- 10" end-cutting nippers
- Rubber mallet
- Drill and 7/16" diameter drill bit
1.
Carefully turn chair upside-down
onto rug or other soft, clean surface.
2.
To protect chair leg finish, pull out glide
by hand, if possible.
3.
If you are unable to remove glide by hand,
insert screwdriver between glide foot and chair
leg and rotate screwdriver 90 to pry glide foot
away from leg.
4.
Using nippers, grasp glide firmly between
glide foot and chair leg.
5.
Holding chair with hand, pull out glide
with nippers.
Note: If glide foot seperates from glide body
during this procedure, drill out glide body
using 7/16" diameter drill bit.
Carefully drill through center of glide body
about 1-1/4" deep. With drill power off, pull
straight up until entire glide is removed.
6.
Insert new glide into hole in bottom of leg,
then press it into leg until glide foot is flush
against bottom of leg.
Note: Use a rubber mallet if glide cannot
be installed by hand.
7.
When glide replacement is complete,
carefully turn chair rightside-up.
1
5
PULL
3
90
Glide Removal with Screwdriver and Nippers
Hard Glide
Felt Glide
Assemble Glides
4
GLIDE FOOT
GLIDE BODY
6
Page 2 of 2
902507403 Rev B