Coalesse Topo 조립 지침 매뉴얼 - 페이지 9
{카테고리_이름} Coalesse Topo에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coalesse Topo 10 페이지. Biplane
페이지 인쇄Attaching the Worksurface Extension
1.
Turn the extension worksurface upside down.
TIP: Place the extension worksurface near the base with
the counterbored holes towards the worksurface as shown.
2.
Attach the base.
3.
Attach the mounting bracket to the underside of the
workstation as shown.
4.
Turn the extension worksurface assembly upright and
install the tite-joint fasteners per the hardware
manufacturer's instructions.
5.
Attach the extension worksurface into position by
inserting two (2) screws through the mounting bracket and
into the pilot holes on the underside of the extension
worksurface.
BASE
2
1
MOUNTING BRACKET
3
4
EXTENSION WORKSURFACE
WORKSTATION
EXTENSION
WORKSURFACE
WORKSTATION
4
5
Page 9 of 10
939500422 Rev D