Coalesse Train series 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Coalesse Train series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coalesse Train series 8 페이지. Modular table power system train tables

페이지 인쇄

SHIPPED COMPONENTS

(1) modesty panel

(1) hardware package

HARDWARE PACKAGE

(4) (73053705) torx head screws, 1/4-20 x 1/2"

(1) (811772R) right-hand bracket, R

(1) (811772L) left-hand bracket, L

(1) latchlock tape on each bracket

TOOLS REQUIRED

(1) electric drill or rachet with T-27 torx bit

Attach Modesty Panel To Assembly

Note: To attach the modesty panel,

Train table top must be flipped up.

Brackets are identified with "L"

or "R". Attach the left-hand

bracket, "L", LOOSELY to the

leg on the user's left with (2)

torx head screws. Attach the

right-hand bracket, "R",

LOOSELY to the leg on the

user's right with (2) torx head screws.

Attach modesty panel to table by slipping

the clips over the stretcher.

Align top of brackets with top of modesty panel.

Also, adjust brackets on each side for the latchlock

tape surface to fully contact the modesty panel.

With upper modesty panel door open, peel off the

protective backing of the latchlock tape to expose

the adhesive. Close the modesty panel door and

firmly press the door, adhering the latchlock tape

on each bracket to the door.

DO NOT OPEN THE MODESTY PANEL DOOR FOR 24 HOURS.

For full cure the door should not be opened for 24 hours.

MODESTY PANEL

LATCHLOCK

TAPE

Attach bracket,

facing outward,

to inside of leg.

FLIPPED

TOP

BRACKET

STRETCHER

BRACKET

CLIPS

939505524 Rev D

Page 4 of 8