Coalesse Train series Інструкція з монтажу Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Внутрішнє оздоблення приміщень Coalesse Train series. Coalesse Train series 8 сторінок. Modular table power system train tables
Друкувати сторінку
SHIPPED COMPONENTS
(1) modesty panel
(1) hardware package
HARDWARE PACKAGE
(4) (73053705) torx head screws, 1/4-20 x 1/2"
(1) (811772R) right-hand bracket, R
(1) (811772L) left-hand bracket, L
(1) latchlock tape on each bracket
TOOLS REQUIRED
(1) electric drill or rachet with T-27 torx bit
Attach Modesty Panel To Assembly
Note: To attach the modesty panel,
Train table top must be flipped up.
1.
Brackets are identified with "L"
or "R". Attach the left-hand
bracket, "L", LOOSELY to the
leg on the user's left with (2)
torx head screws. Attach the
right-hand bracket, "R",
LOOSELY to the leg on the
user's right with (2) torx head screws.
2.
Attach modesty panel to table by slipping
the clips over the stretcher.
3.
Align top of brackets with top of modesty panel.
Also, adjust brackets on each side for the latchlock
tape surface to fully contact the modesty panel.
4.
With upper modesty panel door open, peel off the
protective backing of the latchlock tape to expose
the adhesive. Close the modesty panel door and
firmly press the door, adhering the latchlock tape
on each bracket to the door.
DO NOT OPEN THE MODESTY PANEL DOOR FOR 24 HOURS.
For full cure the door should not be opened for 24 hours.
MODESTY PANEL
LATCHLOCK
TAPE
Attach bracket,
facing outward,
to inside of leg.
FLIPPED
TOP
LH
BRACKET
STRETCHER
1
BRACKET
RH
BRACKET
CLIPS
939505524 Rev D
Page 4 of 8