Aktakom ACM-2031 사용자 설명서 - 페이지 19

{카테고리_이름} Aktakom ACM-2031에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom ACM-2031 20 페이지. Ac/dc clamp meter

will be turned off automatically. To turn it on,

rotate the rotary switch or push any function

buttons only.

REPLACING THE BATTERY

avoid

personal injury, remove the test

leads and any input signals before

replacing the battery. Replace only

with same type of battery.

When the electrical tester displays the "

mark or the backlight be not very lit, the battery

must be replaced to maintain proper operation.

Use the following procedure to replacing the

battery:

1. The Rotary Switch is used to select OFF.

Disconnect test leads from any live source and

remove the test leads from the input terminals.

2. Remove screws on the battery cover and

open the cover.

3. Remove the exhausted battery and replace

with three new 1.5V size AAA batteries.

4. Place battery cover and secure by a screw.

WARNING

electrical

shock