Aktakom ACM-2031 Kullanıcı Kılavuzu - Sayfa 19

Ölçüm Cihazları Aktakom ACM-2031 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aktakom ACM-2031 20 sayfaları. Ac/dc clamp meter

will be turned off automatically. To turn it on,

rotate the rotary switch or push any function

buttons only.

REPLACING THE BATTERY

avoid

personal injury, remove the test

leads and any input signals before

replacing the battery. Replace only

with same type of battery.

When the electrical tester displays the "

mark or the backlight be not very lit, the battery

must be replaced to maintain proper operation.

Use the following procedure to replacing the

battery:

1. The Rotary Switch is used to select OFF.

Disconnect test leads from any live source and

remove the test leads from the input terminals.

2. Remove screws on the battery cover and

open the cover.

3. Remove the exhausted battery and replace

with three new 1.5V size AAA batteries.

4. Place battery cover and secure by a screw.

WARNING

electrical

shock