Aktakom ATA-2504 사용자 설명서 - 페이지 3
{카테고리_이름} Aktakom ATA-2504에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom ATA-2504 9 페이지. Clamp meter
페이지 인쇄
Overvoltage Category I (CAT I):
Equipment for connection to circuits in which measures are
taken to limit the transient overvoltages to an appropriate low level.
Overvoltage Category II (CAT II):
Energy-consuming equipment to be supplied from the fixed
installation.
Overvoltage Category III (CAT III):
Equipment in fixed installations.
SAFETY INFORMATION: (Read First Before Operation)
Please follow the following instructions carefully for safe operation.
■
NEVER use the clamp meter for Voltages higher than 600V.
■
DO NOT hold the clamp meter beyond its tactile barrier.
■
DO NOT use the clamp meter and accessories if they look
damaged.
■
USE CAUTION when working with high voltages.
■
USE CAUTION when measuring the voltages higher than
30VAC rms or 60VDC. These voltages pose a shock hazard.
■
USE
EXTREME
conductors or bus bars.
■
ALWAYS use the clamp meter as the instructions in the manual.
WARNING: If the clamp meter is used in a manner
Not specified by the manufacturer, the protection
Prov ided by the clamp me ter may be impaired.
CAUTION
when
2
www.tmatlantic.com
working
around
bare