Aktakom ATE-9030 사용자 설명서 - 페이지 5

{카테고리_이름} Aktakom ATE-9030에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom ATE-9030 9 페이지. Sound level meter

페이지 인쇄

During execute the Datalogger function, if press the «Logger Button» (3-8, Fig. 1) once will pause the Datalogger

function (stop to save the measuring data into the memory circuit temporally). In the same time the text of «REC» will

stop flashing.

Remark: If press the «Logger Button» (3-8, Fig. 1) once again will execute the Datalogger again, the text of «REC»

will flashing.

c. Finish the Datalogger

During pause the Datalogger, press the «REC Button» (3-4, Fig. 1) continuously at least two seconds, the «REC»

indicator will be disappeared and finish the Datalogger.

Remark: When the battery is under the low battery condition (show the low battery indicator), the Datalogger

function is disable.

5-3 Manual Datalogger (Set sampling time = 0 second)

a. Set sampling time is to 0 second

Press the «REC Button» (3-4, Fig. 1) once, the LCD will show the text «REC», then press the «Logger Button»

(3-8, Fig. 1) once, the «REC» will flashing once, at the same time the measuring data along the time information and

the Position no. will be saved into the memory circuit.

Remark:

* Lower Display will show the Position/Location no. (P1, P2... P99).

* During execute the Manual Datalogger, press the «SET Button» (3-7, Fig. 1 ) once, then use the «▲ Button» (3-

5, Fig. 1) or «▼ Button» (3-6, Fig. 1) to set the measuring position (1 to 99, for example room 1 to room 99) to identify

the measurement location. After finish the adjustment location no., press the «Enter Button» to entry.

b. Finish the Datalogger

Press the «REC Button» (3-4, Fig. 1) continuously at least two seconds, the «REC» indication will be disappeared

and finish the Datalogger.

5-4 Check time information

During the measurement if press «Time check Button» (3-5, Fig. 1) > 2 seconds, the lower LCD display will present

the time information of Year/Month, Date/Hour, Minute/Second.

5-5 Check sampling time information

During the measurement, If press «Sampling Check Button» (3-6, Fig. 1) once , the lower LCD display will present

the Sampling time information in second unit.

5-6 SD Card Data structure

1) When the SD card is used into the meter, the SD card When the first time, the SD card is used into the meter,

the SD card will generate a folder :

SLA01

2) If the first time to execute the Datalogger, under the route SLA01\, will generate a new file name SLA01001.XLS.

After exist the Datalogger, then execute again, the data will save to the SLA01001.XLS until Data column reach to

30,000 columns, then will generate a new file, for example SLA01002.XLS

3) Under the folder SLA01\, if the total files more than 99 files, will generate anew route, such as SLA02\ ........

4) The file's route structure:

SLA01\

SLA01001.XLS

SLA01002.XLS

.....................

SLA01099.XLS

SLA02\

SLA02001.XLS

SLA02002.XLS

.....................

SLA02099.XLS

SLAXX\

.....................

Remark: XX : Max. value is 10.

6. SAVING DATA FROM THE SD CARD TO THE COMPUTER (EXCEL

SOFTWARE)

1) After execute the Data Logger function, take away the SD card out from the «SD card socket» (3-18, Fig. 1).

2) Plug in the SD card into the Computer's SD card slot (if your computer build in this installation) or insert the SD

card into the «SD card adapte». Then connect the «SD card adapter» into the computer.

3) Power ON the computer and run the «EXCEL software». Down load the saving data file (for example the file

name: SLA01001.XLS, SLA01002.XLS) from the SD card to the computer. The saving data will present into the

EXCEL software screen (for example as following EXCEL data screens), then user can use those EXCEL data to make

the further Data or Graphic analysis usefully.

EXCEL data screen (for example)