Aktakom AMM-1081 운영 매뉴얼 - 페이지 16

{카테고리_이름} Aktakom AMM-1081에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom AMM-1081 20 페이지. Smart multimeter

5-8 Current mA ( AC/DC ) measurement

1)Connect BLACK test lead into " COM " terminal ( 3-9,

Fig. 1 ).

2)Connect RED test lead into " mA " terminal ( 3-10, Fig. 1 ).

Open the circuit in which current is to be

measured. Now securely connect test leads in

series with the load in which the current is be

measured.

3)Select the " Function switch " ( 3-7, Fig. 1 ) to the

" mA " position.

4)Power On the meter by pressing the " Power On button "

( 3-2, Fig. 1 ) once, the Display will show " SMART ",

the meter is under " Smart " mode for AC mA, DC mA

measurement.

5)The meter can measure the AC mA, DC mA value

automatically and with auto range selection ( 60 mA,

600 mA ).

5-9 Current 10A ( AC/DC ) measurement

1)Connect BLACK test lead into " COM " terminal ( 3-9,

Fig. 1 ).

2)Connect RED test lead into " 10 A " terminal ( 3-11, Fig. 1 ).

Open the circuit in which current is to be

measured. Now securely connect test leads in

series with the load in which the current is be

measured.

The max. measurement

current for the mA range should

less than 600 mA, otherwise

the protection fuse will be broken.