Aktakom AMM-1081 운영 매뉴얼 - 페이지 15

{카테고리_이름} Aktakom AMM-1081에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom AMM-1081 20 페이지. Smart multimeter

b. When connected as shown in Fig. 3, a reverse check

on the diode is made. If the diode under test is

good, " OL " will be displayed. If the diode under

test is defective, " .000 " or other numbers will be

displayed. Proper diode testing should include both

steps a. and b. above.

5-7 Capacitance Measurement

1)Connect BLACK test lead into " COM " terminal ( 3-9,

Fig. 1 ).

2)Connect RED test lead into " Ω " terminal ( 3-8, Fig. 1 ).

3)Select the " Function rotary switch " ( 3-7, Fig. 1 ) to

the "

" position.

4)Power On the meter by pressing the " Power On button "

( 3-2, Fig. 1 ) once, the Display will show " SMART ", the

meter is under " Smart " mode for capacitance measurement.

5)The meter can measure the capacitance value automatically

and with auto range selection.

Fig. 3