Aktakom AMM-1081 운영 매뉴얼 - 페이지 13

{카테고리_이름} Aktakom AMM-1081에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom AMM-1081 20 페이지. Smart multimeter

5-4 Voltage ( ACV/DCV ) measurement

1)Connect BLACK test lead into " COM " terminal ( 3-9,

Fig. 1 ).

2)Connect RED test lead into " V " terminal ( 3-8, Fig. 1 ).

3)Select the " Function switch " ( 3-7, Fig. 1 ) to

the " V " position.

4)Power On the meter by pressing the " Power On button "

( 3-2, Fig. 1 ) once, the Display will show " SMART ",

the meter is under " Smart " mode for voltage measurement.

5)The meter can measure the ACV, DCV value automatically

and with auto range selection.

5-5 Resistance measurement

1)Connect BLACK test lead into " COM " terminal ( 3-9,

Fig. 1 ).

2)Connect RED test lead into " Ω " terminal ( 3-8, Fig. 1 ).

3)Select the " Function switch " ( 3-7, Fig. 1 ) to

the " Ω " position.

4)Power On the meter by pressing the " Power On button "

( 3-2, Fig. 1 ) once, the Display will show " SMART ", the

meter is under " Smart " mode for resistance measurement.

5)The meter can measure the resistance value automatically

and with auto range selection.

5-6 Continuity, Diode measurement

Continuity measurement

1)Connect BLACK test lead into " COM " terminal ( 3-9,

Fig. 1 ).

2)Connect RED test lead into " Ω " terminal ( 3-8, Fig. 1 ).

3)Select the " Function switch " ( 3-7, Fig. 1 ) to

the "

" position.

4)Power On the meter by pressing the " Power On button "

( 3-2, Fig. 1 ) once, the Display will show " SMART ", the

meter is under " Smart " mode for Continuity measurement.